What is the future of DDCSv2.1

stivemaster · Posted at 2019-3-14 18:07:58

Hello first I want to make the arrangement that I do not want to offend anyone with my opinion!
What I want to say to the developers of this controller is that they make the brute mistake not to investigate what the requirements for a CFC controller are. But it is not a meat grinder controller. There is an ISO standard and principles that can not be respected if you want users to embrace your idea and enjoy it and ultimately sell it.
I bought this controller and I still can not understand how exactly I can try to use a PROBE. The developer obviously tried to realize one of his ideas, but he did not try to study HOW THIS IS ALREADY WORKED BY 100,000 OTHER DEVELOPERS and works flawlessly .
Nowhere has I found an example with a file that includes a sample of 10 times a PROBE and the code corrected afterwards.
And now, precisely because of this, this controller will go into the trash and my feelings for the developer can predict what they are.

ytliu · Posted at 2019-3-27 18:18:59

The general functions are described in the manual. The functions outside the manual are not in the service scope, such as macros. If we add these instructions to the manual, it will increase the service cost.
Some users in the forum put forward the needs, in good faith, in the case that I can do it, try to satisfy, but it does not mean that I have the responsibility to meet these needs.

ytliu · Posted at 2019-3-16 17:45:47

I am very touched by your attention and understanding. It is the driving force of my work, thank you very much.

sahg · Posted at 2024-6-28 13:23:54

nice.
لعبة بادل

roberto · Posted at 2020-10-21 05:23:05

Olá Tenho um DDCSV2.1 ,Liga mas não sai da primeira tela todos as funções travadas, como faço para reinstalar o firmiware .
Alguem poderia me ajudar ?
desde já agradeço.

OldGuy57 · Posted at 2020-7-22 20:54:22

Does this posting mean that an NC/NO limit switch will not work ? "DDCSV2.1 or 3.1 requires the use of an NPN photoelectric switch"
I have connected limit/home switches according to the online instructions, and the DDCSV2.1 never recognizes the,
In reading of the postings here, the reply to User Stein is the only reference to the NPN type switches I can find.
If NPN switches are the only ones recognized, I will purchase them , but I dont want to waste time and money only to find out NC/NO will work, and perhaps I just dont know what settings to change. I adjusted settings as you have indicated in other posts to allow HOME/LIMIT to share that switch, but that didnt change anything either. Please help, and thank you.

OldGuy57 · Posted at 2020-7-20 02:22:30

When I unzip files to my UDIsk and put it in the controller, it does not update or upgrade the firmware. It doesn't do anything except boot normally.
I would like to ask if there is some sort of a trigger or way to say to the controller to update or upgrade
DDCSV2.1 Firmware now at 2018-07-27-97NOR
Thank You

ytliu · Posted at 2019-10-31 07:32:12

Last edited by ytliu In 2019-10-31 07:35 Editor

Hi Stein.
DDCSV2.1 or 3.1 requires the use of an NPN photoelectric switch.If the axis is deviated during machining, adjust the pulse signal level of the axis (#418-#421)

Stein · Posted at 2019-10-31 00:31:38

Good afternoon, I agree with the author of the topic. I bought the DDCSV2.1 controller, at first there was no limit to my joy, but then surprises began to appear. The Probe sensor also does not work, which I just did not try, but the command goes to lower the sensor it doesn’t work, I punched it stupidly with a milling cutter

, then Limit sensors do not work, I use the PNP type according to the instructions. Well, okay, I’m most saddened by the sudden departure of the axis during operation, so today I cut the product and got a little hello. that there are no backlashes and nothing wedges, the couplings are all tightened. Soon I will put the rotary axis, in general I have big plans for the machine and the controller, but there is no solid confidence in it. In general, I want to reflash it and that everything would work in it and not fail, but for now ...

ytliu · Posted at 2019-5-28 06:44:20

Ver: 2019-05-28-111 Description:
(2019-05-27-111)
1. Increase G93(inverse time feed rate mode) support.
In inverse time feed rate mode, an F word means the move should be completed in one divided by the F number minutes.
For example, if the F number is 2.0, the move should be completed in half a minute.
http://bbs.ddcnc.com/forum.php?mod=viewthread&tid=62&extra=page%3D1&page=3
(2019-05-28-111)
2. In the inverse screen layout, correct the problem of displaying when switching to M5;

ytliu · Posted at 2019-5-28 05:56:04

Hi alexwalex,
Sorry, I forgot, I will fix it today.

alexwalex · Posted at 2019-5-28 00:17:59

Ytliu, remained uncorrected one small bug.

What is the future of DDCSv2.1

TEL

0755-87654321