What is the future of DDCSv2.1 - DDCSV2.1 - Standalone CNC Motion Controller - Digital Dream Technology support
View: 21004|Reply: 27

What is the future of DDCSv2.1

[Copy Link]

3

Threads

24

Posts

184

Credits

Registered member

Rank: 2

Credits
184
Posted at 2019-3-14 18:07:58 | All floors |Read mode
Hello first I want to make the arrangement that I do not want to offend anyone with my opinion!
What I want to say to the developers of this controller is that they make the brute mistake not to investigate what the requirements for a CFC controller are. But it is not a meat grinder controller. There is an ISO standard and principles that can not be respected if you want users to embrace your idea and enjoy it and ultimately sell it.
I bought this controller and I still can not understand how exactly I can try to use a PROBE. The developer obviously tried to realize one of his ideas, but he did not try to study HOW THIS IS ALREADY WORKED BY 100,000 OTHER DEVELOPERS and works flawlessly .
Nowhere has I found an example with a file that includes a sample of 10 times a PROBE and the code corrected afterwards.
And now, precisely because of this, this controller will go into the trash and my feelings for the developer can predict what they are.

Reply

Use props Report

8

Threads

333

Posts

1040

Credits

Super Moderator

Rank: 8Rank: 8

Credits
1040
Posted at 2019-3-27 18:18:59 | All floors
The general functions are described in the manual. The functions outside the manual are not in the service scope, such as macros. If we add these instructions to the manual, it will increase the service cost.
Some users in the forum put forward the needs, in good faith, in the case that I can do it, try to satisfy, but it does not mean that I have the responsibility to meet these needs.
Reply Support 1 Opposition 0

Use props Report

8

Threads

333

Posts

1040

Credits

Super Moderator

Rank: 8Rank: 8

Credits
1040
Posted at 2019-3-16 17:45:47 | All floors
I am very touched by your attention and understanding. It is the driving force of my work, thank you very much.
Reply Support 1 Opposition 0

Use props Report

0

Threads

26

Posts

1819

Credits

Gold member

Rank: 6Rank: 6

Credits
1819
Posted at 2019-3-15 00:00:54 | All floors
On my controller "probe" works correctly with all modes (1, and 2, and 3). What does not suit you in work "probe" ?
Reply Support Opposition

Use props Report

3

Threads

24

Posts

184

Credits

Registered member

Rank: 2

Credits
184
 Author| Posted at 2019-3-15 03:02:48 | All floors
Last edited by stivemaster In 2019-3-15 03:14 Editor

I bought the controller from here and there is no model3 in the software installed in it.When I do something, I know very well how exactly this is done to do it well.Developers have many ways to inform themselves to make a real fancy cnc controller, but they could look at at least to see wikipedia what the mass client would expect from their work.There he writes, according to ISO rs274, what a plc controller should do to be called a cnc controller.
Reply Support Opposition

Use props Report

8

Threads

333

Posts

1040

Credits

Super Moderator

Rank: 8Rank: 8

Credits
1040
Posted at 2019-3-15 05:55:59 | All floors
I am sorry for the confusion you have caused.
Probe mode 3 has a description in http://bbs.ddcnc.com/forum.php?m ... page%3D4&page=2, see 13# and 21# for details. In addition, Will_D helped us write the probing manual (here again thanks to his excellent work), you can download it at http://bbs.ddcnc.com/forum.php?m ... amp;extra=page%3D5.
Reply Support Opposition

Use props Report

3

Threads

24

Posts

184

Credits

Registered member

Rank: 2

Credits
184
 Author| Posted at 2019-3-16 07:02:41 | All floors
I may have to specify, that as I speak to probe all the time, I am talking about calling the function, during the execution of d code, for correction. Would you give a working example for this,and version of the software you use.
Reply Support Opposition

Use props Report

8

Threads

333

Posts

1040

Credits

Super Moderator

Rank: 8Rank: 8

Credits
1040
Posted at 2019-3-16 08:55:40 | All floors
You can add the following program to your G code:
M101 (open probed function)
G91 G01 Z-50.0 F500.0 (Z axis moves down 500mm, in this process, if the probe signal appears, the motion will stop)
M102 (turn off the probed function)
G04P0 (synchronous)
G90 G92 Z0.0 (Set the current workpiece coordinate system Z-axis coordinate to 0.0)

In order to use the above features, your version requires Ver: 2018-10-12-102 or later.
Reply Support Opposition

Use props Report

3

Threads

24

Posts

184

Credits

Registered member

Rank: 2

Credits
184
 Author| Posted at 2019-3-16 16:29:03 | All floors
The controller arrived with the software version 89 installed on it. In this version, once it touched, the line runs out and nothing follows. It does nothing then G90G92Z0.
Where can I download the version you recommend and how does it install?
Reply Support Opposition

Use props Report

8

Threads

333

Posts

1040

Credits

Super Moderator

Rank: 8Rank: 8

Credits
1040
Posted at 2019-3-16 16:49:09 | All floors
Last edited by ytliu In 2019-3-16 17:00 Editor

The attachment is the latest version.
Unzip "install" directory to the root directory of the u disk, then insert the u disk into the controller, then power on the controller, and the system will automatically complete the installation.

install(2019-01-22-106).zip

600.11 KB, Down times: 423

Reply Support Opposition

Use props Report

1

Threads

4

Posts

79

Credits

Registered member

Rank: 2

Credits
79
Posted at 2019-3-16 17:03:59 | All floors
Hi ytliu
Thanks for all your hard work, and the latest update. Good to see you back on the forum.
I assume all is OK for DDCSV 2.1
Best Regards
picclock
Reply Support Opposition

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list