Flared corners on carve - DDCSV3.1 Standalone CNC Motion Controller - Digital Dream Technology support
View: 2021|Reply: 0
Print Previous Topic Next Topic

Flared corners on carve

[Copy Link]

1

Threads

1

Posts

5

Credits

Newbie Member

Rank: 1

Credits
5
Jump to the specified floor
Landlord
Posted at 2021-5-28 23:07:42 | Only Author |Only larger image Replies reward |Descending browser |Read mode
Good Day

I am having an issue with my corners varving flared with a round top corner when using a vcarve toolpath generated in Aspire. I am using gcode.tap files(mm) with an amana tool rc45711 90degree cutter. this phenomenon occurs with all cutters i have tried. i have also tested with a 60 degree, 30 degree and 15 degree cutter with the same/similar result.

Please see attached pics for examples. Any clues on why this is happening?

IMG_20210526_111647.jpg (265.74 KB, Down times: 783)

IMG_20210526_111647.jpg

IMG_20210526_111724.jpg (579.6 KB, Down times: 806)

90 Degree letter R

90 Degree letter R

IMG_20210526_111724.jpg (579.6 KB, Down times: 803)

IMG_20210526_111724.jpg
Reply

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list