A little bag in controller soft

Cosmosukr

There is a bag in input port set with a probe. In menu (input ports) floating probe in fact is fix probe and fix probe in fact is floating probe. I had a headache setting those probes.

Cosmosukr

One more problem.
On the very beginning of each start of program the first 5 second CNC machine moves with a short sharp steps and then it works smooth.
But during the work time Y-axis could change its work zero as it wants +/- 15mm. I have no idea what is going on. It happens only with Y-axis.
Today I found some strange feature with Y-axis: in manual "CONT" mode I can use 4 axis (XYZA) all together only with Y-. If I press Y+ I can use only X-axis. Any attempt to press any other axis key (but X-axis) together with Y+ just stop all the move.
How to solve this problem?

Cosmosukr

Today I made a test if the problem with Y-axis is on DDCSE side or on CNC side. I've changed connectors between X and Y axis and the problem is still on Y+ button.
If I press Y+ button and then press Z+ button CNC is stoped. The same result with Y+ and 4+. Any other 2-3-4 keys kit work correctly. So, problem is with DDCSE soft.Could you help me?

Cosmosukr

During the problem of discrete movement there is "Excessive processing speed causes buffer interpolation21(N60 G00 Z5.)"
May be it helps to understand what is wrong.

Cosmosukr

Problem with discrete movement was in wrong System interpolation set. After I changed the value from 0.001 to 0.01 CNC stoped jumping. It's a very good news!
And a bad news is I found one more soft bag: I was trying to disable soft limit for the A axis, I set negative volume higher then positive (in manual it means disable soft limit for this axis) and it doesn't work. Max volume 9999 with + or - in any combination gives 27.8 full circles (9999/360=27.8). If I reduce the volume then amount of circles reduce as well.

Cosmosukr

Thank you, I'll try to speak with her.

Cosmosukr

Thank you Jessy, please send me a video about Para#164 and the Key functional file.