15 ton and 20 ton Double Girder Overhead Crane for sale to Pakistan

taitai

We have completed a double girder overhead crane installation project in Pakistan. The crane installation project includes a set of 15 ton overhead crane and a 20 ton overhead crane, all of which are QD type. All crane parts are shipped from Qingdao port in China to Qasim Kalkahi port in Pakistan by sea

15 ton Double girder overhead crane parameters

• Lifting capacity: 15T
• Lifting height: 11.5M
• Span: 15.75M
• Working class: ISO M5
• Power supply: 380v, 3phase, 50hz
• Cabin control
  

20 ton Double girder overhead crane parameters

• Lifting capacity: 20T
• Lifting height: 11.5M
• Span: 15.75M
• Working class: ISO M5
• Power supply: 380v, 3phase, 50hz
• Cabin control
  

Technical information

Lifting capacity		t	15	20
Lifting height		m	11.5	11.5
Span		m	15.75	15.75
Speed	Trolley traveling	m/min	39.7	39.7
	Crane traveling		71	71
	Lifting		7.9	7.2
Working class		/	ISO M5	ISO M5
Power supply		V/Hz	380v, 3phase, 50hz	380v, 3phase, 50hz
Trolley traveling power		KW	4	4
Crane traveling power			2*6.3	2*6.3
Hoisting power			26	26
Total power			42.6	42.6
Total Crane Weight		t	20.95	22.14
Max crane wheel load		KN	153	153
Protection class		/	H	H
Insulation class		/	IP54	IP54
Working temperature		/	-20℃ ~ +50℃	-20℃ ~ +50℃
Steel		/	Q235B	Q235B
Country of Origin		/	China	China

Note:Recommended Crane Rail Specification (not included in quotation)

Type	Top Width(mm)	Bottom Width(mm)	Height(mm)	Weight(kg/m)
P43	70	114	140	44.65

Overhead Crane Finished Installation

(The above picture is for reference to crane model only)

QD type hook bridge crane is a general-purpose bridge crane for trolleys. The crane relies on the longitudinal movement along the direction of the supporting track on the driving beam of the workshop, the lateral movement of the trolley and the lifting of the hook to realize the working process. The common lifting capacity is 5 tons-600t , working level A3A4A5-A8. There are three types of bridge crane operation modes: ground control, control room control and remote control for users to choose.

A5 level is suitable for general machining and assembly workshops, metal structure workshops, mechanical maintenance workshops, etc., where the workload is not very heavy;

A6 and A7 grades are suitable for occasions with frequent work or continuous production or continuous handling, and can also be used as shop-lifting and hoisting in metallurgical and foundry workshops; the operating environment temperature is -20-40 ℃, and the relative humidity is ≤85%;

15 ton and 20 ton Double Girder Overhead Crane for sale to Pakistan