DDCSV2.1 Stop when spindle turn on. - DDCSV2.1 - Standalone CNC Motion Controller - Digital Dream Technology support
View: 5301|Reply: 2

DDCSV2.1 Stop when spindle turn on.

[Copy Link]

3

Threads

5

Posts

141

Credits

Registered member

Rank: 2

Credits
141
Posted at 2018-5-5 04:23:57 | All floors |Read mode
Last edited by billydragon In 2018-5-5 05:45 Editor

I have install and config DDCSV2.1 for firsth time. Every thing seem oke. movement correct, Homing, limit working fine. I try run my g-code, without spindle on ( turn off inveter). My machine run from start to end. But problem is just start with spindle, Spindle turn on then machine star moving G0 and imediatly stop and RESET blinking. I can't find solution to solved this. Maybe some thing wrong in setting of Spindle control?

I used Inveter Best. connect VSO , GND and M3/M5 pin. I can set speed, turn on/off manual.

This is sort Video I take:
https://youtu.be/pL1oFkmAB-o




Reply

Use props Report

9

Threads

53

Posts

669

Credits

Senior Member

Rank: 4

Credits
669
Posted at 2018-5-5 17:30:13 | All floors
Again thanks for the new release but please tell what is new
Reply Support Opposition

Use props Report

3

Threads

5

Posts

141

Credits

Registered member

Rank: 2

Credits
141
 Author| Posted at 2018-5-5 23:13:36 | All floors
I Found the problem.
I using limit sensor which using 3 wires. When Spindle work and step motor work it make noise then that limit sensor make electric switch like estop or limit signals.


Need to add noise filter or using just simple mechanic contact switching.

Reply Support Opposition

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list