self-made tool auto-checking Description (probe.nc)

enjoy_cnc

Dear all，

The following accessories for self-made tool auto-checking  operation instructions and macro interpretation。

stepmotor

"I keep getting "check syntax 28"

on my DDCSV1.1 it too.
tool probe work on one, if the selected mode in the current coordinate.
if I choose in a fixed position it does not work and gives an error in line 28, I tried to change, gives in another line I do not understand why so. Help please

supergoldfish

I keep getting "check syntax 28.." on my screen when probing.  Using 1.1 hardware, with posted above firmware.  I can't get probing function to work following the document procedure posted above.  Any one else having the same error?  Anyone have a video showing how they accomplish a successful probe?

Will_D

Sorry to hear that.

Thanks for your help.

Will talk later

enjoy_cnc

Will_D Posted at 2018-3-9 00:32
I am trying to write a tool change macro that will eventually be T.nc is the system folder.

I have  ...

Dear Will_D,

   Recently something happened, I didn't have time to reply you, sorry!
  
  (probe.nc), (T.nc), the custom m instruction (M200.nc-M9999.nc) belongs to a special function macro file, which is not the same as the normal subprogram restriction condition.

  Therefore, the code in the probe.nc file cannot be executed in a subroutine.

Will_D

WHile checking out some code I notice that the command:

T6 M6 does a probe! Where is this functionslity defined.

My T.nc does not do much:


G01 X2 F10
    Y2
    Z2
%

Will_D

I am trying to write a tool change macro that will eventually be T.nc is the system folder.

I have copied the probe.nc code into a macro [O456] in Tmac3.nc .
The probe works but the macro is not returning cack to the caller so the code after the call is not executed.

I have attatched the file. Note it is just a txt or nc file but the uploader does not allow such extensions.


Can you please allow .nc and .txt extensions please

Thanks

Will

enjoy_cnc

Will_D Posted at 2018-3-7 22:03
probe.nc is now working thank you.

I am trying to convert the code into a macro that I can call fro ...

Dear Will_D

The probe.nc file can only be called by a keystroke, it cannot be called by G code like a subroutine;

"
G91 G01 Z#575 F#578; The knife is completed, Z axis back
G91 G01 X10.0; Move to X + 10 "

Please upload your own modified probe.nc file, I test it!

Will_D

probe.nc is now working thank you.

I am trying to convert the code into a macro that I can call from within a tool change macro. Or can I call probe.nc that's within the system directory from a GCode file?
So the end of the probe.nc code is this:

G04 P0ause 0s
#402=#400;Save the Z axis zero offset of the coordinate system
#403=1;Set automatic correction coordinate system logo
#404=-#870;Save the tool thickness, if the previous tool thickness parameter is 0, the system will use this variable to modify the tool thickness parameter to complete the first knife
G91 G01 Z#575 F#578;  The knife is completed, Z axis back

So I now want to move to another position so I try:

G04 P0ause 0s
#402=#400;Save the Z axis zero offset of the coordinate system
#403=1;Set automatic correction coordinate system logo
#404=-#870;Save the tool thickness, if the previous tool thickness parameter is 0, the system will use this variable to modify the tool thickness parameter to complete the first knife
G91 G01 Z#575 F#578;  The knife is completed, Z axis back
G91 G01 X10.0; Move to X+10

Trouble is the move in X does not happen!

I am at a loss as to what I am doing wrong I have tried all sorts to make X move!!

enjoy_cnc

Will_D Posted at 2018-3-6 23:28
Many thanks. Can you please use zip format please as you now have to by a rar license!!

Also questi ...

Dear Will_D,

Zip archive has been updated in the above location;

3 and 4 are 3-axis system and 4-axis system installation package folder,
The two main differences are: chs and eng profiles are different；

Kind regards