The probe problem - DDCSV2.1 - Standalone CNC Motion Controller - Digital Dream Technology support
Return to List Add thread
View: 4567|Reply: 0
Print Previous Topic Next Topic

The probe problem

[Copy Link]
gjh

4

Threads

10

Posts

86

Credits

Registered member

Rank: 2

Credits
86
Jump to the specified floor
Landlord
Posted at 2019-4-18 09:02:26 | Only Author Replies reward |Descending browser |Read mode
After going through the procedure outlined in edelec's probe thread, I have discovered that setting parameter #223 to 'no' (disable M8/M9/M10/M11) seems to disable the probe input. Or perhaps it interferes with the M101 function, or both.

Gerry
Reply

Use props Report

Return to List Add thread
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list