Feedrate , Spindle and Rapid Override setup and connection

Mehmet · Posted at 2018-7-24 15:26:44

Dear All,

I have a new DDCSV 2.1. I have some questions about abilities of the controller. You can find attached photo.
- When the during to working , I want to set spindle speed , feedrate and rapid override with potentiometers.
- Can I add USB keyboard at the v2.1 controller.
- Can I add an external button to stop the machine and make the machine goto machine zero origin?
"M5 M9"
"G91 G28 Z0."
"G91 G28 X0.Y0."
"M30"
Thanks
If it is possible , I need helps for conection diagrams.

Mehmet

Nikolay81 · Posted at 2018-7-26 17:09:57

ytliu Posted at 2018-7-25 15:38
The installation package in the accessory expands the function of the external button. Now there are ...

What should be written in the file exekey2.nc so that the external button toggles the step mode (0.01-0.1-1-10) as the button num5 of the USB keyboard keys?

GregFil · Posted at 2023-3-27 10:28:25

SMA Solar Technologies AG is a German firm that produces and distributes solar power systems. Since its inception in 1981 by a group of students at the University of Kassel, the firm has expanded to employ over 3,000 people and generate over $1 billion in yearly sales in Australia alone (according to their 2018 annual report). Site here

ytliu · Posted at 2018-7-27 10:48:18

Nikolay81 Posted at 2018-7-27 04:00
It's hard for me to describe some things with words. I do not know much English. It's better to s ...

Hi Nikolay81,
Don't worry, I can visit Youtube.

Nikolay81 · Posted at 2018-7-27 04:00:07

ytliu Posted at 2018-7-26 17:43
Sorry, you can't implement the function you requested with the nc code. If you need it, I can add ...

It's hard for me to describe some things with words. I do not know much English. It's better to show it on video. But, you can post on the forum, only very small files. Also I know that in China there is a problem with access to many sites, for example to Youtube (my company supplies parts of planes to China). So, tell me where can I upload a video so you can see it?

ytliu · Posted at 2018-7-26 17:43:29

Nikolay81 Posted at 2018-7-26 17:09
What should be written in the file exekey2.nc so that the external button toggles the step mode (0 ...

Sorry, you can't implement the function you requested with the nc code. If you need it, I can add a configuration.

Mehmet · Posted at 2018-7-26 15:53:57

hi nikolay,
I know we can use keyboard. Maybe We can add a game joystick in the future !

Mehmet · Posted at 2018-7-26 15:22:12

Thank you very much.

ytliu · Posted at 2018-7-26 06:10:10

Mehmet Posted at 2018-7-25 20:38
Sorry , I don't understand 2 external button wired into the DDCSV I am confused about wired and ...

Please follow the diagram to connect the expansion key 1 and 2

Nikolay81 · Posted at 2018-7-25 22:19:12

Mehmet Posted at 2018-7-25 20:38
Sorry , I don't understand 2 external button wired into the DDCSV I am confused about wired and ...

Download the instruction. It says where to connect.
https://www.nvcnc.net/ddcsv2.1.html
In the future, you can do any control panel. With USB connection.
If Ytliu does set up the USB keyboard keys.
Do you know that you can now connect a USB keyboard?

Feedrate , Spindle and Rapid Override setup and connection

TEL

0755-87654321