The probe problem - DDCSV2.1 - Standalone CNC Motion Controller - Digital Dream Technology support
View: 4467|Reply: 0
Print Previous Topic Next Topic

The probe problem

[Copy Link]

4

Threads

10

Posts

86

Credits

Registered member

Rank: 2

Credits
86
Jump to the specified floor
Landlord
Posted at 2019-4-18 09:02:26 | Only Author Replies reward |Descending browser |Read mode
After going through the procedure outlined in edelec's probe thread, I have discovered that setting parameter #223 to 'no' (disable M8/M9/M10/M11) seems to disable the probe input. Or perhaps it interferes with the M101 function, or both.

Gerry
Reply

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list