Five sets of HD overhead cranes and European electric hoists sold to Hong Kon...

taitai

HD overhead crane procurement parameters

• Order time: 2021.9.29
• Lifting capacity: 5 ton, 4 ton
• Lifting height: 9.4 m, 8.5 m
• Span: 11 m, 2.3 m
• Working voltage: 380v/50hz/3p
• Order content: HD 5 ton overhead crane*4 + 4 ton overhead crane*1
• Exporting country: Hong Kong, China
  

This is the order of overhead crane from Hong Kong in 2021. The customer purchased 4 sets of HD 5t overhead crane and 1 set of HD 4t overhead crane from our crane factory. The order was placed in the factory on October 8, and the design drawings were confirmed with the customer on October 12. The crane motors were all Siemens and arrived on November 19. On December 31, the factory selected one of the completed 5-ton overhead crane and one of the 4-ton overhead crane for load test. Sent to Hong Kong on February 28, 2022. This batch of overhead cranes will be used for a construction contract project in Hong Kong. The atlas shows the details of the overhead crane and European electric hoist in the factory production process. If you want to know more about the overhead crane and the latest price of the 5-ton overhead crane, please contact us.

HD Overhead Crane Introduction

HD crane is a kind of low headroom crane, usually used in factory workshops with low space height, which can effectively use the space height and increase the lifting height.

The HD electric single-girder crane is independently developed and designed on the basis of introducing advanced European design and manufacturing technology and combining the latest domestic standards such as GB3811-2008 and JB/T1306-2008. The appearance is beautiful, and the driving mechanism adopts KONE three-in-one reducer (hard tooth surface reducer, frequency conversion brake motor), which is completely comparable to similar European products in terms of appearance and technical performance. Its superior performance is reflected in the mature application of modular design, frequency conversion speed regulation, automatic detection and other technologies, and various protection functions such as overload protection, overcurrent protection, and voltage loss protection make the electric single beam more perfect.

HD electric single-girder crane is suitable for working in the environment conditions of working level A3～A5, working environment temperature -25℃～+40℃, relative humidity ≤85% and no flammable, explosive or corrosive medium. The lifting capacity is 1-16 tons, and the span is 7.5-25.5 meters. The crane power supply is three-phase AC with a rated frequency of 50Hz or 60Hz. The rated voltage is 220V ~ 660V. The upper and lower limits of the allowable voltage fluctuation of the motor are ±10%, and the internal voltage loss of the crane is not more than 3%.

Five sets of HD overhead cranes and European electric hoists sold to Hong Kong, China in 2021