Drilling, axis A problem - DDCSV2.1 - Standalone CNC Motion Controller - Digital Dream Technology support
View: 5600|Reply: 7
Print Previous Topic Next Topic

Drilling, axis A problem

[Copy Link]

3

Threads

8

Posts

58

Credits

Registered member

Rank: 2

Credits
58
Jump to the specified floor
Landlord
Posted at 2019-5-20 15:25:11 | Only Author Replies reward |Descending browser |Read mode
Hi

Axis A does not execute g-code
display all the time shows 0 axis A

%
(GRAWEROWANIE NAPISU)

(CREATED 05/20/2019 09:15:19)

(#9 - T9 CHAMFER D 3MM )

N1
G54
(T9 CHAMFER D 3MM)
M8
M69
G98 G18 M45
G0 G28 H0
()
G50 S500
(T9 CHAMFER D 3MM)
G0 T0909
G97 S3000 M3
G0 X27 Z1.1
G81 X14 A3.6Z-0.2 R1.9P500 F95
A7.2
A10.8
A14.4
A18
A21.6
A25.2
A28.8
A32.4
A36
A39.6
A43.2
A46.8
A50.4
A54
A57.6
A61.2
A64.8
A68.4
A72
A75.6
A79.2
A82.8
A86.4
A90
A93.6
A97.2
A100.8
A104.4
A108
A111.6
A115.2
A118.8
A122.4
A126
A129.6
A133.2
A136.8
A140.4
A144
A147.6
A151.2
A154.8
A158.4
A162
A165.6
A169.2
A172.8
A176.4
A180
A183.6
A187.2
A190.8
A194.4
A198
A201.6
A205.2
A208.8
A212.4
A216
A219.6
A223.2
A226.8
A230.4
A234
A237.6
A241.2
A244.8
A248.4
A252
A255.6
A259.2
A262.8
A266.4
A270
A273.6
A277.2
A280.8
A284.4
A288
A291.6
A295.2
A298.8
A302.4
A306
A309.6
A313.2
A316.8
A320.4
A324
A327.6
A331.2
A334.8
A338.4
A342
A345.6
A349.2
A352.8
A356.4
A0
G80
G0 X27 Z1.1
G53 X0 Z0
M1
M5
M9
M46
M30
%

What's wrong with g-code?

Reply

Use props Report

7

Threads

43

Posts

195

Credits

Registered member

Rank: 2

Credits
195
Sofa
Posted at 2019-5-20 16:00:11 | Only Author
There is no A position option in G81. I suggest you make your A move then run G81 as a subroutine
Reply Support Opposition

Use props Report

8

Threads

333

Posts

1040

Credits

Super Moderator

Rank: 8Rank: 8

Credits
1040
Bench
Posted at 2019-5-20 16:09:24 | Only Author
As edelec said, the G81 command in the current motion library(slib.nc) does not parse the A axis.The attached slib.nc adds A-axis parsing, try it out.

install.zip

2.05 KB, Down times: 738

Reply Support Opposition

Use props Report

3

Threads

8

Posts

58

Credits

Registered member

Rank: 2

Credits
58
Floor
 Author| Posted at 2019-5-20 16:42:05 | Only Author
Last edited by LUCID In 2019-5-20 16:54 Editor

Thank you very much guys !
file from ytliu solved the problem!
I struggled the whole weekend
The machine is now working perfectly

Reply Support Opposition

Use props Report

3

Threads

8

Posts

58

Credits

Registered member

Rank: 2

Credits
58
5#
 Author| Posted at 2019-5-21 01:27:50 | Only Author
Last edited by LUCID In 2019-5-21 02:16 Editor

Axis-A does not work, however, with G83

%
(GRAWEROWANIE NAPISU)

(CREATED 05/20/2019 18:55:03)

(#7 - T7 DRILL D 1MM )

M8
G98 G18 M45
G0 G28 H0
G50 S0
G0 T0707
G97 S9549 M13
G0 X27 Z2
G83 X14 A18Z-0.382 R0P500 Q0.5 F50
A36Q0.5
A54Q0.5
A72Q0.5
A90Q0.5
A108Q0.5
A126Q0.5
A144Q0.5
A162Q0.5
A180Q0.5
A198Q0.5
A216Q0.5
A234Q0.5
A252Q0.5
A270Q0.5
A288Q0.5
A306Q0.5
A324Q0.5
A342Q0.5
A0Q0.5
G80
G0 X27 Z2
G0 A0 Z60
M1
M5
M9
M46
M30
%

Can you help?
Reply Support Opposition

Use props Report

8

Threads

333

Posts

1040

Credits

Super Moderator

Rank: 8Rank: 8

Credits
1040
6#
Posted at 2019-5-21 06:05:16 | Only Author
All drilling instructions(G73,G81,G82,G83) have been modified.

install.zip

2.04 KB, Down times: 707

Reply Support Opposition

Use props Report

3

Threads

8

Posts

58

Credits

Registered member

Rank: 2

Credits
58
7#
 Author| Posted at 2019-5-21 13:27:08 | Only Author
Thank you again for help
very good job ytliu
I'm happy because the machine works perfectly
I cordially greet !
Reply Support Opposition

Use props Report

8

Threads

333

Posts

1040

Credits

Super Moderator

Rank: 8Rank: 8

Credits
1040
8#
Posted at 2019-5-21 13:29:13 | Only Author
slib.nc in the firmware supports fixing drilling cycles on axis A (G73, G81, G82, G83).
Reply Support Opposition

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list