Last edited by ytliu In 2018-11-13 22:09 Editor
• Max. 4 Axis;2-4 Axis linear interpolation,any 2 axis circular interpolation; • 7 opto isolated digital outputs,8opto isolated digital inputs; • Support every Input and output port definition by users; • The controller need 2 power supply,one power supply is for system power,one is for input and output ports power.Both input power is 24V,2A; • Open-collector output, Max.output current is 500mA,can power the relay directly; • Differential Pulse and direction output signal,Max. 500Khz per axis; • Spindle Control: 3 I/O ports control 8 different speeds(3 lines 8 speeds),1 I/O control the Start/Stop; • The System Support standard G-code.Also Support the popular CAD/CAM software,such as ArtCam,MasterCam,ProE and so on; • USB flash disk support for G code file input; • The control system can preview the process path before machining,and it makes the system more steady,workingsmoothy and precise; • Acceleration/Deceleration Mode: S curve; • Support un-limited size file for machining; • Manual/Automatic machining function; • Support the operation to Start a G code from a specific line; • Support for “Power Cut” recovery. Data is automatically saved; • Support time-lock function; • Support 4 kinds operation rights:visitor,operator,admin,super admin. • Support modbus RTU protocol DM500 Motion Controller user Manual:
DM500 Motion Controller user Manual.pdf
(1.5 MB, Down times: 648)
| 
Posted at 2018-11-13 20:41:14
Favorite