DM500t3/DM500t4 handheld CNC controller is on the market!!!

ytliu

•   Max. 4 Axis;2-4 Axis linear interpolation,any 2 axis circular interpolation;

•   7 opto isolated digital outputs,8opto isolated digital inputs;

•   Support every Input and output port definition by users;

•   The controller need 2 power supply,one power supply is for system power,one is for input and output ports power.Both input power is 24V,2A;

•   Open-collector output, Max.output current is 500mA,can power the relay directly;

•   Differential Pulse and direction output signal,Max. 500Khz per axis;

•   Spindle Control: 3 I/O ports control 8 different speeds(3 lines 8 speeds),1 I/O control the Start/Stop;

•   The System Support standard G-code.Also Support the popular CAD/CAM software,such as ArtCam,MasterCam,ProE and so on;

•   USB flash disk support for G code file input;

•   The control system can preview the process path before machining,and it makes the system more steady,workingsmoothy and precise;

•   Acceleration/Deceleration Mode: S curve;

•   Support un-limited size file for machining;

•   Manual/Automatic machining function;

•   Support the operation to Start a G code from a specific line;

•   Support for “Power Cut” recovery. Data is automatically saved;

•   Support time-lock function;

•   Support 4 kinds operation rights:visitor,operator,admin,super admin.

•   Support modbus RTU protocol

DM500 Motion Controller user Manual:

DM500 Motion Controller user Manual.pdf (1.5 MB, Down times: 620)

2018-11-13 22:08 Uplaod

Click on the file name to download attach

enjoy_cnc

Hello jjae6
Thank you for taking the time to carefully read our brochure.
The correct M-code corresponding to the input and output is exactly what you said, thank you for your valuable comments.

jjae6

Hi, i read some errors in manual page 31. Extended Input and Output Ports Table:
Inputs port Y01 to Y07 should be M501/M601 to M507/607 ? and
Output port  X02 should be  M702/M802 ?

jjae6

enjoy_cnc Posted at 2018-11-17 20:35
Hello jjae6
Thank you for taking the time to carefully read our brochure.
The correct M-code corresp ...

Not at all, It’s my pleasure.
But I have seen another error... I don't know if it means anything in English .. But in front of your DM500 controller I read DIGITAL "DERAM", instead of DIGITAL "DREAM". If it is an error, they should change all the stickers they could as soon as posible, this would give a more professional touch.

PD:  My English is not my first language and I also make many mistakes.

B/R
jjae6.

enjoy_cnc

Hello jjae6,
thank you for your feedback! It should be a "dream", the silk screen is wrong!

milawka2222

It is possible to connect an PULSE CODER to it, it is just convenient sometimes to use it, if so how and what?

milawka2222

I do not have right now axis "A"
how to disable the installation of a HOME on the axis "A" when you press the button "HOME" ???!!!
Normal Mod
Ver:2018-04-12-93H1026-ENG

Problem solved in typo firmware

Huan

Dear Sir,it is an editing error.In new version we will update it.Thanks the help to enhance our products.

waiduci

Hi there can i find original firmware for this controller? I need it becouse i thinks my faulty controller ... its beeps all the time then  turned it on. So o try to write pandora firmware ddscv .. i reax that its based on this controller so i try it.and. Now its the same..beeps .but showing only starting in normal.. after that its shows 90degree screen rotated.. can you please give me link to download a firmware?