Home and Limits

ytliu

If you want to use the proximity switch for the limit and also for the HOME, you first need to connect the proximity switch signal to the corresponding limit port, and then set the corresponding parameter in #116-#119, for example, the X axis. The proximity switch is connected to LIMITX+, and the #116 parameter(X-axis zero signal source select) needs to be set to 1 (X++limit signal). When the HOME operation is performed, the X axis will move in the positive direction to find the HOME signal.

ytliu

Plexi47 Posted at 2018-10-22 21:14
Hi ytlu,
let's see if I've understood:
The 3 Home switches are at position X --  Y -- Z ++

Your understanding is correct. When #116-#119 is equal to 0, the direction of HOME is determined by #64-#67.

ytliu

Please set the #51 parameter to disable.

ytliu

I have already learned your question from the dealer. As you have described, the software currently has problems in the display of the backlash. Due to my lack of ability, I have not thought of an effective solution. Sorry, if you think this defect is unacceptable, you can contact the dealer to return it.