DDCSV macro description

Will_D

Many thanks for this information. It is very useful.

One question though
I am still using version 1.1

I am trying to write a tool change macro.

Parameter #268 is "H01 tool offset"

If I set this and others to know values I cannot see the value as parameter #768. Its value is 0

Will_D

Your Englisdh is much better than my Chinese!!

Thanks for the reply (and also the tool change macro example - will try this out later )

My question is:
If I set parameter #82 to 20.00 (Safe Z retract Height) in my controller, I can then use #582 in my script as it will equal 20.00

If I set parameter #268 to 10.00 (H01 tool offset) in my controller, I can see that #768 in my script is set to 0.00

Will

{UPDATE}

My mistake. I forget to send the M3 command!! Now all works

Will_D

ytliu Posted at 2018-2-26 21:46
Hi JPoepsel!
102 subprogram is used to play back the track of the tool. Before using the 102 subrout ...

Few of us have rar. Please use .zip format

Will_D

ytliu Posted at 2018-3-2 07:36
Hi!
Sorry, I will use .zip format later

Many thanks for the zip