
Last edited by ytliu In 2018224 21:02 Editor
DDCSV Coordinate System Description:
The coordinate systems in DDCSV system include machine coordinate system, G53 coordinate system and G54G59 coordinate system.
The machine coordinate system is established by home operation or zero under MACH. Read # 864 # 867 (X, Y, Z, A) to find the position of the tool in the machine coordinate system.
G53 is based on the machine coordinate system. # 800 # 803 (X, Y, Z, A) describes the distance from the origin of the G53 coordinate system to the origin of the machine coordinate system. Adjusting these parameters can reconstruct the G53 coordinate system. Read # 868 # 871 (X, Y, Z, A) to find the position of the tool in the G53 coordinate system.
The G54G59 coordinate system is based on the G53 coordinate system. # 804 # 807 (G54 X, Y, Z, A), # 808 # 811 (G55 X, Y, Z, A), # 812 # 815 (G58 X, Y, Z, A), # 816 # 819 (G57 X, Y, Z, A), # 820 # 823 G54 X, Y, Z, A) respectively describe the distance from the origin of G54G59 coordinate system to the origin of G53 coordinate system, and adjust these parameters to reconstruct the G54G59
coordinate system; Read #840#843(G54 X、Y、Z、A)、#844#847(G55 X、Y、Z、A)、#848#851(G56 X、Y、Z、A)、#852#855(G57 X、Y、Z、A)、#856#859(G58 X、Y、Z、A)、#860#863(G59 X、Y、Z、A)to find the position of the tool in the G54G59 coordinate system.
#516 describes the system currently working coordinate system, 0 corresponds to the G53 coordinate system, 16 corresponds to the G54G59 coordinate system, 7 corresponds to the machine coordinate system. 
