VSO output pin rises and falls VERY slowly

Nikolay81

I confirm. The spindle accelerates very slowly.

Nikolay81

I installed a capacitor of 16V 10μF. The spindle unwinding speed with this capacitor is the same as without a capacitor.

Nikolay81

Everything is much easier. Capacitors of this type are very fragile. It is easy to break it off with pliers. Then you need to remove the plastic pad, unsolder the leads and solder the new capacitor.

Nikolay81

r6mf49t2 Posted at 2018-10-9 14:03
What should be the parameter # 433 for the fastest possible change in VSO?

# 433 = 0