Post processor for DDCS v3.1 - DDCSV3.1 Standalone CNC Motion Controller - Digital Dream Technology support
View: 57|Reply: 1

Post processor for DDCS v3.1

[Copy Link]

1

Threads

1

Posts

13

Credits

Newbie Member

Rank: 1

Credits
13
Posted at 2021-2-19 21:28:51 | All floors |Read mode
Hi
I have installed the DDCS v3.1 to control my milling machine. It all works really well in manual mode and via the MPG. I have produced very simple G code written manually and saved as a text file. Using this the controller drove the machine just as I had expected. However, manually writing G code would take to long to mill components. I have designed my components on Fusion 360, and used the post processor to generate g code from the various setups. I looked for DDCS V3.1 in the Post Configuration and couldn't find it. I tried the Linux and Fanuc configurations, but neither of these worked for me. Can anyone advise me what Post Configuration I should use?
Reply

Use props Report

3

Threads

16

Posts

111

Credits

Registered member

Rank: 2

Credits
111
Posted at 2021-2-20 15:55:19 | All floors
Hello. Use G-code (mm) (*. tap) or G-code Arcs(mm) (*. tap)
Reply Support Opposition

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list