Help with wiring - DDCSV3.1 Standalone CNC Motion Controller - Digital Dream Technology support
View: 117|Reply: 6

Help with wiring

[Copy Link]

3

Threads

8

Posts

31

Credits

Newbie Member

Rank: 1

Credits
31
Posted at 2021-1-26 11:26:25 | All floors |Read mode
Router 6060 Wentai manufacturer. I installed 3.1 DDCS. I can operate 3 axis and turn spindle on with screen. Remote hand control estop button is depressed. If I release button, alarm goes off. Why does screen work if button is depressed? What am I doing wrong and why is the alarm? Also, there is a terminal block for connections of a estop on machine, but I am not clear on the wiring. It looks like you need a switch that grounds all the 3 terminals? Can you send me a link to a proper switch and how to wire it?
Reply

Use props Report

3

Threads

8

Posts

31

Credits

Newbie Member

Rank: 1

Credits
31
 Author| Posted at 2021-1-26 11:34:54 | All floors
Also, when I just press x or y arrow keys, axis seem to move too fast and hard. How do I slow down that action?
Reply Support Opposition

Use props Report

3

Threads

8

Posts

31

Credits

Newbie Member

Rank: 1

Credits
31
 Author| Posted at 2021-1-26 22:50:26 | All floors
Does the manufacturer not visit this forum?
Reply Support Opposition

Use props Report

0

Threads

3

Posts

8

Credits

Newbie Member

Rank: 1

Credits
8
Posted at 2021-2-14 02:51:50 | All floors
Check parameter # 429 Electric level of ESTOP on MPG - change it from 0 to 1 or 1 to 0. Should fix your ESTOP.
Reply Support Opposition

Use props Report

0

Threads

3

Posts

8

Credits

Newbie Member

Rank: 1

Credits
8
Posted at 2021-2-14 02:52:44 | All floors
Check parameter # 429 Electric level of ESTOP on MPG - change it from 0 to 1 or 1 to 0. Should fix your ESTOP.
Reply Support Opposition

Use props Report

0

Threads

3

Posts

8

Credits

Newbie Member

Rank: 1

Credits
8
Posted at 2021-2-14 02:55:22 | All floors
Change parameter #100 and #101 to lower values.
Reply Support Opposition

Use props Report

3

Threads

8

Posts

31

Credits

Newbie Member

Rank: 1

Credits
31
 Author| Posted at 2021-2-16 08:28:32 | All floors
I fixed Estop with that, however the wheel still does not work. No axis moves. If I try to move any axis with MPG, I can hear X motor make noise, but not move.
Reply Support Opposition

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list