Poor work G83

ytliu

Modified the definition of G83 in slib.nc and added G73 support. Increase #2020(G73 Retraction amount) and #2021(G83 Retraction amount)

ytliu

Execute G99G83X10Y10Z-15R0Q5, if #2021=0, decomposition action:
G0X10Y10
G0Z0
G1Z-5
G0Z0
G0Z-5
G1Z-10
G0Z0
G0Z-10
G1Z-15
G0Z0
If #2021=1, the decomposition action:
G0X10Y10
G0Z0
G1Z-5
G0Z0
G0Z-4
G1Z-10
G0Z0
G0Z-9
G1Z-15
G0Z0

Execute G99G73X10Y10Z-15R0Q5, if #2020=0, decomposition action:
G0X10Y10
G0Z0
G1Z-5
G1Z-10
G1Z-15
G0Z0
If #2020=1, the decomposition action:
G0X10Y10
G0Z0
G1Z-5
G0Z-4
G1Z-10
G0Z-9
G1Z-15
G0Z0

ytliu

Nikolay81 Posted at 2018-8-1 21:03
Yes. It's perfect.
Many thanks.
If you can, you need to add a little improvement.

I made changes as per your request. Instruction format: G83(G73)X_Y_Z_R_Q_I_K_

ytliu

Nikolay81 Posted at 2018-8-1 22:24
The G83 cycle now works perfectly.
It is better not to think up.
The G73 cycle does not work prope ...

try it out