wiring ddcsv3.1 to Converter YL620

pierrevk11@gmai

Need help with wiring from ddcsv3.1 to Frequency Converter YL620

The Controller does not switch on the Spindle

DZiK

First you need to switch the use of an external potentiometer in the inverter settings. Parameter P00.01.
Next, you need to make sure that the settings are set to use a 0-10V control signal.

The GND and VSO output of the panel is connected to the inverter to set the frequency.

The GND and M3 output of the panel is connected to the inverter for rotation enable FWD.

gregfo

How Are Florida's Solar Costs Changing?
Although solar technology is pricey, prices have been declining countrywide over the last three decades, and Florida is following the same pattern. The Solar Energy Industries Association (SEIA) reports that in only the last 10 years, the price of panels in Florida has decreased by an astounding 53%. Us saite.

The expectation is that costs will keep dropping as solar technology develops and domestic mass manufacturing facilities gain in popularity. Although it's impossible to say for sure, we anticipate that the cost of solar equipment in Florida will be lower in another five to ten years but not at the same rate.

Alexpo

When choosing the ideal panel for your setup and budget, take into account the panel's wattage, efficiency ratings, and degradation rates. However, Panasonic's better efficiencies and lower degradation rates are more stable over time, and although mid-range panels will still produce a significant amount of their nameplate power over time. In the end, you should plan for the system that will serve your current and future energy demands the best. Site: https://panasonicsolarpanels.com/