Firmware download

maxx2000

Hey. And where you can see the full list of supported G and M codes

maxx2000

With the latest firmware(2018-09-07-100).zip), the following happens.
Start  program, and hit the FRO button to adjust the feed rate. Controller locked up.  Locked up & could only reboot to clear it.

maxx2000

I thought this was some kind of inexpensive with new features. Thank you. Everything is working.

maxx2000

firmware 2018-09-07-100
The problem with the hang has remained.
1. Run the program.
2. press FRO button
3.Rotate the handwheel to change the feed value.
if after that you press the pause button and then resume operation, the controller freezes. Only the Reset button works.
If the feed is adjusted with buttons, this is not observed.

There may be some conflict with the new feature..

maxx2000

Marked one bug.
In the inverse screen layout, if you press FRO, then choose M5. The entire screen is highlighted.