Firmware download

Nikolay81 · Posted at 2018-7-20 17:15:19

ytliu Posted at 2018-7-20 08:26
sorry! I did not find the problem you described, try another usb keyboard

The problem occurs when the keyboard is connected directly, without a USB hub. But with the hub, the response speed for releasing the key is greater than on the controller itself. That is, with manual control from the USB keyboard, the axis does not stop very fast. Can I reduce the response time for releasing the keys?

ytliu · Posted at 2018-7-20 08:26:08

Nikolay81 Posted at 2018-7-19 23:09
Thank you very much for improving the software, this wonderful controller.
Sorry for the bad english ...

sorry! I did not find the problem you described, try another usb keyboard

ytliu · Posted at 2018-7-20 08:24:18

thossapit Posted at 2018-7-19 17:50
This Firmware work with DDCSV1.1 ?

yes

Nikolay81 · Posted at 2018-7-19 23:09:25

Thank you very much for improving the software, this wonderful controller.
Sorry for the bad english - I write through Google translator.
There is a problem with the usb keyboard. If, hold and hold the button for
moving any axis for a long time, after releasing the button, the axis continues to move.
It can be fixed?

thossapit · Posted at 2018-7-19 17:50:33

This Firmware work with DDCSV1.1 ?

hdo26 · Posted at 2018-7-16 14:47:00

That's great thank you! Now it would be great if the DRO information is sent out through the serial interface ;-)

Firmware download

View forum before

TEL

0755-87654321