Firmware download

ytliu

Yes, install_2018-07-30-98 is the latest full version.

We have considered updating the manual, but this may take some time.

Will_D

It is really appreciated the work that is going by ytliu and Nikolay and others.

Its great that the forum is active again and developing the software.

Can you please confirm that install_2018-07-30-98 is the latest full release as thetr  have been some code modules etc issued in August?

It would be really helpful id the 2.1 manual was updated as most of the screen shots are of an old 1.1 (they dont show the mach coordinates!!)

Will_D

Nikolay81 Posted at 2018-8-8 15:26
A complete list can always be seen in the file slib.nc
The list with a detailed description will b ...

Surely slib.nc only lists the gcodes that are defined by a set of other gcodes (like a macro). I think the OP would like a full list which would include the likes of G00, G04, and sll the other codes directly implemented by the code

Nikolay81

maxx2000 Posted at 2018-8-8 14:16
Hey. And where you can see the full list of supported G and M codes

A complete list can always be seen in the file slib.nc
The list with a detailed description will be a little later.
You can help make it up.

maxx2000

Hey. And where you can see the full list of supported G and M codes

Nikolay81

There are many important changes:
-Cycle G83, now works correctly. Syntax: G83 X Y Z R Q I K. All parameters must be specified. Usually, K=1; I=0
-Added cycle G73. Syntax: G73 X Y Z R Q I K. All parameters must be specified. "I" is the distance of the retract. K=1
-The command M110 is added. This is an analog of M0, but the Z axis does not rise. Also, when using this command, a beep sounds.
-Added command G153. This is analog G53 (go to machine coordinates). Example G153 X0 Y0 F6000
-The command G92 is fixed. Example G90 G92 X0 Y0 (zero the X and Y axes).           
-In lines with comments, now only comments are displayed. For example, to manually change an instrument, you write M110 (tool name).
Now only the contents of the brackets will be written on the screen. That is "tool name". This gives more space for the name of the instrument.
-Many small fixes.

An example of using new features can be found in the topic "Postprocessor for SheetCam"

ytliu

DDCSV 1.1 PLC CNC CONTROLLER team member Alexei Koh redesigned defprobe.nc to make corner search more flexible. Thanks to Alexei Koh for his great work.

The video for the explanation:https://youtu.be/redy2ZoETdk，This video was provided by Alexei Koh.

the new version adds JOG distance configuration, you can set it by #2020-#2023.

In addition, the Russian language pack has been added to the new version, You can set the #1 parameter to 3 to use it. Thanks to Nikolay81 for the great work done for it.

DDCSV 1.1 PLC CNC CONTROLLER: https://www.facebook.com/groups/1724999967517167/

Nikolay81

Corrected the Russian translation.
Now it has become even more convenient.

Nikolay81

ytliu Posted at 2018-8-2 16:14
Now increase the number of characters displayed on the main page. When you translate, consider the  ...

Thank you.
Now all is well.
I attached the updated translation to the message.
Settings that I do not understand, I will translate later.
But there are not many of them.

ytliu

Nikolay81 Posted at 2018-8-1 19:47
I finished the preliminary translation.
Surely, there are a lot of mistakes in it :-)
Those setting ...

Now increase the number of characters displayed on the main page. When you translate, consider the length of the string, otherwise it may exceed the display area of the UI Widgets.
#16 is used to set the currently selected coordinate system. Since the coordinate system selection can be performed on the main page, the #16 parameter can be hidden.

#16 -t2 -s1"Текущая система координат" -m0 -min=1.000 -max=6.000 -i0"G53" -i1"G54" -i2"G55" -i3"G56" -i4"G57" -i5"G58" -i6"G59"


Later, for those parameters that are not easy to understand, I will try to explain to you.