|
|
Also faced with this situation, interference is excluded, U disk is working. After pressing RESET, it was noticed that it reacts to manual movement along the axes but does not respond to automatic commands, for example, to the “ALL GoTo Zero” command, it does not respond and does not execute the command. After a power restart, everything falls into place, everything is executed and the G code is executed without problems. The firmware is the latest version. On old firmware this was not noticed. Please correct this situation as it is not permissible !!!
Moreover, this is not the first case.  |
|
Posted at 2020-6-1 19:43:11