DDCSV2.1 first ON board show White screen - DDCSV2.1 - Standalone CNC Motion Controller - Digital Dream Technology support
View: 4486|Reply: 7

DDCSV2.1 first ON board show White screen

[Copy Link]

1

Threads

2

Posts

11

Credits

Newbie Member

Rank: 1

Credits
11
Posted at 2018-3-30 18:11:40 | All floors |Read mode
Hi,

    Please help, I have a problem for the first time turn ON controller. It is show "white screen" i can not see main page

Remark : input power 24Vdc 10 amp.


67477.jpg
67468.jpg
67467.jpg
Reply

Use props Report

1

Threads

8

Posts

172

Credits

Registered member

Rank: 2

Credits
172
Posted at 2018-3-31 21:13:53 | All floors
Have you tried starting the controller with a pin drive installed that has the current software installed?  I cannot remember if that is required, but that is how I started mine.

Rob
The afternoon knows what the morning never suspected.
Reply Support Opposition

Use props Report

1

Threads

2

Posts

11

Credits

Newbie Member

Rank: 1

Credits
11
 Author| Posted at 2018-4-1 08:30:05 | All floors
PPRINT Posted at 2018-3-31 21:13
Have you tried starting the controller with a pin drive installed that has the current software inst ...

Dear Rob,
    After making their purchase, first time i received the product but i can never open the controller.
Reply Support Opposition

Use props Report

1

Threads

8

Posts

172

Credits

Registered member

Rank: 2

Credits
172
Posted at 2018-4-1 11:14:11 | All floors
My choice of words seem to be causing a communication breakdown.  Let's try this again.
My control came with a red/black scandisk memory stick that had files installed from the factory.  I inserted that memory stick in the usb port before I turned the control on.

I am not certain this is required, but it is what I did.

The memory stick that came with my control looked like this.

Rob


images.jpg
The afternoon knows what the morning never suspected.
Reply Support Opposition

Use props Report

3

Threads

5

Posts

17

Credits

Newbie Member

Rank: 1

Credits
17
Posted at 2018-4-26 16:25:42 | All floors
Mine came with this pendrive too, but it was empty...
please someone can share the files??

i delete the main files inside the controller playing around and now it is bricked.
In the website i cannot find any compatible file for this model...
Reply Support Opposition

Use props Report

1

Threads

2

Posts

7

Credits

Newbie Member

Rank: 1

Credits
7
Posted at 2018-5-12 14:10:31 | All floors
How are you doing. Here is the website to update your device
http://pandora-cnc.eu/en/download
Reply Support Opposition

Use props Report

0

Threads

1

Posts

12

Credits

Newbie Member

Rank: 1

Credits
12
Posted at 2018-5-15 04:10:46 | All floors
Firmware is also available on this webpage, at the bottom.
https://www.nvcnc.net/ddcsv2.1.html
Reply Support Opposition

Use props Report

9

Threads

53

Posts

669

Credits

Senior Member

Rank: 4

Credits
669
Posted at 2018-5-15 18:01:14 | All floors
Looking at the first photo there is a blown IC. Contact supplier and ask for a new one. This is not likely to be a software problem!!
Reply Support Opposition

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list