DDCSV2.1 does not work with the driver

Alessio

Hi !
I have a problem. Your controller does not want to work with the driver of the new modification (in which the NE555 stands). With the driver having the 74HC123 controller all ok. Can I correct the firmware of the controller to work correctly with the new driver?

https://yadi.sk/i/xHhEEW3p3SqtD6
In this video driver in X-axis have 74HC123   -------It's  worked.  No problem.
In axis Y and axis Z  new version drivers with NE555 are standing   ------Don't  worked

I changed the drivers in some places.  74HC123 - WORKED IN ALL AXISS FROM DDCSV2.1
NE555 model - don't work
Can I update the controller firmware for the driver to work properly?
All new drivers now have NE555 and do not work with your controller
https://yadi.sk/i/4oKiefDB3T5wV9
https://yadi.sk/i/vGQ3rVJ93T5wXC


both drivers on the same chip    TB67S109AFTG

both drivers on the same opto 4n25

Alessio

admin Posted at 2018-3-13 19:15
pls give  me you stepperdriver's Schematic file

Hi!
I'm  not have circuit diagram  this driver

Alessio

admin Posted at 2018-3-17 19:28
can you pls send me the stepper driver manual? I will check out where is the problem. Thanks...

I not have manual

TB6600 42/57/86 Stepper Motor Driver 32 segments upgraded version 4.0A 42VDC for cnc engraving machine

Specifications:

This drive is an upgraded version of the TB6600, the breakdown of heightening to 32 segments, for high segmentation purposes. Applicable stepper motor: 42,57,86 type of 2-phase 4-phase (4-wire 6 wire line 8)

Features:

1, 9V-42V DC power supply;

2, H-bridge bipolar constant-phase flow-driven;

3, the maximum output current of 4.0A eight optional;

4, up to 32 segments of six kinds of sub-modes available;

5, the input signal is high-speed optical isolation;

6, standard common anode single pulse interface;

7, offline hold function;

8, semi-enclosed chassis can accommodate more demanding environment;

9, provide energy semiautomatic current lock function;

10, built-in thermal protection and overcurrent protection.

https://ru.aliexpress.com/item/CNC-engraving-machine-42-57-86-TB6600-stepper-motor-driver-32-segments-upgraded-version-4-0A/1000001728584.html?spm=a2g0v.10010108.1000016/B.1.8c3b2643kKqPd6&isOrigTitle=true

Alessio

I connected the driver according to the scheme. Both drivers are connected the same way (driver with 74hc123 and with NE555)

Now I use the driver DM542 3 pieces. One of the three DM542 DOES NOT WORK in step 1 \ 16. I Put all the drivers on microstep 1 \ 64
They work normally. Need adjustment in the controller pulse width STEP
Add the adjustment of the pulse width of the STEP in the menu