Wireless USB MPG/Pendant Support

Lindo

Please keep us all informed.
It looks a very nice remote.

Thanks

John
Spain

Lindo

Hello Ytliu

What is the correct method or protocol for inserting and withdrawing a USB hub with a USB wireless logitech keyboard dongle and a USB stick containing the NC files plugged in together. I have a 4 port hub.
I am getting different results from different permutations of inserting and withdrawing.
One scenario I powered down with both dongle and stick, restarted the controller and display showed nothing other than "nan".
So powered down, fortunately I have another stick containing only a " .set" with my parameters, I inserted this into the USB port, with no hub,  powered up, pressed reset and all OK, so I lost no settings.
Then removed this ".set" stick, inserted the hub, inserted the NC file stick, inserted the dongle and it all worked OK
I was able to modify my NC file via the F3 key and save.
It seems powering down with both dongle and nc file stick then there is a problem.
Sorry this post is long, but I needed you to better understand what is going on.
Best regards

John

Lindo

Hi yaddatrance

Do you mean Del or Esc key ?
Should I be on the main screen before I press
I am concerned that the Del key will totally erase files.

Lindo

Ytliu

Thank you I will fully document my power down procedures and keep you informed.

John

Spain

Lindo

Ytliu

Thank you very much

John

Lindo

yaddatrance and Ytliu
Thanks for the information, I will take it slowly and document.


John
Spain