|
Hello Ytliu
What is the correct method or protocol for inserting and withdrawing a USB hub with a USB wireless logitech keyboard dongle and a USB stick containing the NC files plugged in together. I have a 4 port hub.
I am getting different results from different permutations of inserting and withdrawing.
One scenario I powered down with both dongle and stick, restarted the controller and display showed nothing other than "nan".
So powered down, fortunately I have another stick containing only a " .set" with my parameters, I inserted this into the USB port, with no hub, powered up, pressed reset and all OK, so I lost no settings.
Then removed this ".set" stick, inserted the hub, inserted the NC file stick, inserted the dongle and it all worked OK
I was able to modify my NC file via the F3 key and save.
It seems powering down with both dongle and nc file stick then there is a problem.
Sorry this post is long, but I needed you to better understand what is going on.
Best regards
John
|
|