M150_DM500 Upgrade file download!!!

enjoy_cnc

Hello wayne
     By factory default, Y05 is turned on or off periodically when the system is in the "Reset" state. You can connect an alarm light to Y05.
     If you want to cancel this function, set parameter 216 = 0.
    216，Alarm output enable 0isable 1:Enable

Naz

Hello. Controller DM500(4) ver. 2019-04-23 eng,
stopped open ".nc" files after update to ver. 2020-01-07eng.
The next day it did not turn on
"starting" on black screen . Help me fix it, please.

enjoy_cnc

Hello there
Please use the upgrade package install to restart the upgrade!

Marco

hello, please is there someone who can help me with my Dm500 !!!  I have carried out the last available update, in the settings parameters 68 and 437 ......... 445 are not there you can help me!  thank you very much

milawka2222

Good day.
It is clear that you are busy developing a new controller, but do not forget about ours.
When you please us with the new version of the firmware with the Russian language, you should choose one programmer, and it will take him a maximum of a couple of days ?!
See this and it will be beneficial for you in Russia, their purchaseability will increase, since the lack of support for the Russian language pushes people to the side of buying DDCSV3.1, and see the DM500 is no worse and maybe better than it!
So do not forget about us and we are waiting for the new firmware with the Russian language!

milawka2222

It is very likely that they have forgotten about us!

Oleg.Mass

Как изменить файл logo.bmp? Я поместил в папку install свою картинку, но она не отображается при загрузке контроллера. Какие требования к файлу logo?

milawka2222

Logo
size: 480X320
bit depth: 24 bit
name: logo.bmp
picture location: U:/install

amrali95

hello ,

i need firmware latest for m150

thank you

RedDiamondUK

What is the latest firmware for the DM500 controller and where can I download it? TIA