|
Hello Ytliu.
Using version 2019-03-20-107 NOR
Connected a USB hub to the control USB input, 1 port is a wireless keyboard plug but
at first the control display would not see my USB stick with the NC file.
Just the main files and parameter files.
All scroll and entr functions were OK.
Then changed parameter #120 to 1, then the control was able to see the nc file.
So far no problems.
Now entered the program and it ran it OK under the normal mode cont mode.
Paused the program and I sent the mill back to start all over from the beginning.
Again not a problem.
Pressed reset, entered in the file again, and pressed F4 on the keyboard, this did not work.
I pressed the start button and SBK appeared on the top LH of the screen, by pressing this
it did jump from line to line but stalled after 10 lines, and the control "locked" up. Froze.
I had to power down and power up, not a major issue.
So I tried the F3 to edit, the program lines appeared, but no visible cursor on the screen so
it would not let me edit or scroll.
Running a black background with white numbers letters.
I think I am doing something wrong.
Please help
Thanks
John
Spain
|
|