MPG driving the .nc file.

ytliu · Posted at 2019-5-16 07:14:21

Ver:2019-05-16-109 Description:
6. Correct the error that the program stops responding in single-step(SBK) mode;

Lindo · Posted at 2019-5-18 13:23:26

Not sure if you received my post just sent 18 May 7.15 CET.
Not installed the latest version, still on May 15 th.
Problem with the control not seeing the nc file stick that is inserted into a USB hub, second port of the hub is a remote wifi keyboard dongle.
Without the hub, the USB stick with nc files operates OK.
But with the keyboard attached it does not function, so I cannot use the Functions keys.copy edit files.
I notice you have removed the parameter #120 from the parameter settings, has this been an issue in the past.
Thanks
John
Spain

ytliu · Posted at 2019-5-18 14:27:53

You can modify the eng file and add the #120 parameter to the param page.
#120 -t2 -s1"U disk partition type" -s2"" -m16 -min=0.000 -max=1.000 -i0"With partition" -i1"No partition"

Or force the #120 parameter to 1.
#120=1 -t2 -s1"U disk partition type" -s2"" -m0 -min=0.000 -max=1.000 -i0"With partition" -i1"No partition"

Lindo · Posted at 2019-6-16 11:25:55

Good morning Ytliu.

it´s been very difficult to log into this forum recently.
The link http://bbs.ddcnc.com/forum.php?m ... &page=2#pid1065
has a header NOT SECURE .
Fortunately I have managed to LOGIN this time with my name and password.

Any suggestions

Thanks

John
Spain

ytliu · Posted at 2019-6-16 18:45:05

Hi Lindo.

I will feedback your question to the forum administrator.

MPG driving the .nc file.

TEL

0755-87654321