Possible rookie question

ytliu · Posted at 2019-4-28 10:09:51

You can run your G-code with a small feed rate, such as 3000mm/min.

ytliu · Posted at 2019-4-28 10:05:40

I have received your email.
There must be no spaces in the file name;
What do you mean by "does not work well"?Your G-code specifies F as 18000mm/min. Can your machine reach this speed? If it does, you need to adjust the #77, #78, #79 parameters, as these parameters may limit the actual speed.
Since the dimensions of your G-code is small, you can increase the subdivision of the drive to increase the pulse equivalent parameter.

dexpiste · Posted at 2019-4-28 09:12:31

Sent, thanks

ytliu · Posted at 2019-4-28 07:48:31

You can send your G-code to me by email, my email address: liuyt7017@gmail.com

dexpiste · Posted at 2019-4-28 04:25:13

Well it still does not work, with what extension do you generate the files for this machine? I generate them as G-code (mm) .tap and only the first file works well, that's if I'm new with this machine.
Can you help me?

dexpiste · Posted at 2019-4-27 23:13:05

I forgot, before when I had mach3 if it worked well.

dexpiste · Posted at 2019-4-27 23:07:36

How can I upload a file? I do not know how, I try to paste it but it exceeds the bits

alexwalex · Posted at 2019-4-27 13:28:08

Leave here you G-code

dexpiste · Posted at 2019-4-27 10:00:28

Maybe I have to configure some parameters

Possible rookie question

View forum before

TEL

0755-87654321