Problem with input port (all)

quizzotto

Hi,
I have a problem with my controller, I hope someone can help me.

The mpeg port and motor port works fine, but the input port they do not seem to work properly.

For example:
E-stop with low signal: it makes no difference if I press the button or not, nothing happens.
i try E-stop with high signal: pressing or releasing the button will play a beeep continuously..

hard limit (or home too) with low signal: same thing.. nothing  when i press the switch.
hard limit with high signal: the axis don't move.. when i press the button or not..

i checked the voltage and there are 12 volt..  and of course the e-stop button  and limit switch works fine (all 5)

maybe I lost something in the config  file..  (i hope...)

i try a different firmware and do the same thing..

any suggestion ?

Thanks
Max

quizzotto

edelec Posted at 2019-2-19 23:19
You do not say which version controller V1.1 or V2.1. The first has positive switching the second ne ...

Ok, you are my new hero now..
i have a v2.1..
I tried and it works.. (but my manual says to use 12 volts..)

thanks so much!