15 ton European-spec Double Girder Overhead Crane for sale to Philippines

taitai

We have completed 1 installation project of double girder bridge crane in the Philippines. This is a 15 ton overhead crane model QDX, Shipping from Qingdao port to Cagayan De Oro port. The hoisting mechanism uses a low headroom hoist, and the hoist performance adopts High performance European standard low headroom wire rope hoist with electric trolley, working class FEM 2M, Insulation grade: F, Protection class: IP54

European type Double girder overhead crane parameters

• Lifting capacity=15T
• Lifting height=6m
• Span=8.5m
• 440V 60Hz 3P
• FEM 2M (ISOM5)
• Pendant control
  

Note:

For supervision on installation, client will cover round air tickets, visa application fee, meals, boarding and local transportation. If quarantine is needed in the Philippines, client will be responsible for fees incurred from it.

Technical information

Lifting capacity		t	15
Lifting height		m	6
Span		m	8.5
Speed	Cross traveling speed	m/min	5.0-20 (inverter control)
	Crane traveling speed		10-40 (inverter control)
	Lifting speed		0.8/5.0 (dual speed)
Working class		/	FEM2M (ISOM5)
Power supply		V/Hz/Ph	440/60/3
Cross traveling power		KW	0.75*2
Crane traveling power			1.5*2
Hoisting power			2.6/16
Total power			20.4
Max wheel load		KN	97.4
Total design weight		Kg	6300
Protection class		/	IP54
Insulationgrade		/	F
Ambient temperature		/	-10℃~+40℃
Anti-collision system		/	Included
Phase protection relays		/	Included
Limit switch		/	Included
Voltage Low Protect device		/	Included
Emergency stop action		/	Included
Ground fault protection		/	Included
Short-circuit protection		/	Included
Over-heating protection		/	Included
Power-off protection		/	Included
Over-current protection		/	Included
Overload protector		/	Included
Top Quality Buffer		/	Included
Cross Power		/	C Track Festoon Cables
Country of origin		/	China

Recommended Crane Rail Specification (not included in this offer)

Type	Top Width(mm)	Bottom Width(mm)	Height(mm)	Weight(kg/m)
P30	60.33	107.95	107.95	30.1

Overhead Crane Finished Installation

(The above picture is for reference to crane model only)

European-spec Double Girder Overhead Crane has advanced technology and is designed in accordance with international standards: DIN (Germany), FEM (Europe), ISO (International). It has the advantages of strong rigidity, light weight and outstanding structural design, which can effectively save plant space and Investment cost, unique walking structure characteristics, is your best choice.

European-spec Double Girder Overhead Crane is widely used in workshops, warehouses and other material handling occasions in machinery manufacturing, metallurgy, petroleum, petrochemical, ports, railways, civil aviation, electric power, food, paper, building materials, electronics and other industries. It is especially suitable for material handling, precision assembly of large parts and other occasions that require precise positioning, and the working environment temperature is -25-40 ℃.

European-style double-girder bridge cranes are intelligent equipment, and a variety of functional interfaces are reserved to make function expansion easier;

The European-style double-girder bridge crane has more reliable performance and lower failure rate, which can reduce the cost of use and post-maintenance, and the service cycle can be as long as go years, without worries. Single girder cranes usually refer to single girder overhead cranes. The main beam of the single-girder crane bridge is mostly made of I-shaped steel or a combined section of steel and steel plates. Lifting trolleys are often assembled with chain hoists, electric hoists or hoists as lifting mechanism components.

The European-style double-girder overhead crane has advanced control technology and high-quality key components, which can ensure that the overall performance of the crane is more reliable, the crane starts and runs smoothly, without impact, and has a good mute effect, which can reduce the harm of noise. Single girder cranes usually refer to single girder overhead cranes. The main beam of the single-girder crane bridge is mostly made of I-shaped steel or a combined section of steel and steel plates. Lifting trolleys are often assembled with chain hoists, electric hoists or hoists as lifting mechanism components.

15 ton European-spec Double Girder Overhead Crane for sale to Philippines