|
|
Last edited by cincy-gearhead In 2023-2-16 10:44 Editor
Hello - I have a pretty simple rectangular profile I mill around the outside in about 8 steps, going down in Z 0.100 inch each step. After the first pass, the Y Axis shifts about -0.010 inch for each step. X axis seems ok. I'm using incremental (G91) and not using any backlash (Para. #437 thru #445). Help!
(running simple 3-axis mill with ver 2020-03-06-112NOR)
|
|
Posted at 2023-2-16 10:00:22
Favorite