I have tried everything to get the UC300 to talk to VFD, but it doesn't work. The UC300 owner's manual does not give any information. Any help would be greatly appreciated.
Thanks,
Update. I installed DrufelCNC and verified that the Spindle outputs from the UC300 do indeed work. I am now trouble shooting Mach3, as my settings should work.
Update. I installed DrufelCNC and verified that the Spindle outputs from the UC300 do indeed work. I am now trouble shooting Mach3, as my settings should work.
Posted at 2022-9-7 11:22:35
Favorite
Author