Axis Issue in Automatic Mode Only - DDCSV3.1 Standalone CNC Motion Controller - Digital Dream Technology support
View: 2218|Reply: 0
Print Previous Topic Next Topic

Axis Issue in Automatic Mode Only

[Copy Link]

1

Threads

1

Posts

5

Credits

Newbie Member

Rank: 1

Credits
5
Jump to the specified floor
Landlord
Posted at 2021-8-22 04:54:13 | Only Author Replies reward |Positive sequence Browse |Read mode
Just getting new machine running with DDCSV3.1 with Ver: 2020-03-06-112NOR

Problem with axis movement in AUTOMATIC Mode only.

MPG Mode, all axis move in correct direction.
STEP Mode, all axis move in correct direction.
CONT Mode, all axis move in correct direction.
HOME Mode, all axis move in correct direction.

In AUTOMATIC Mode, X and Y axis are rotated 180 degrees.
TOOL PATH trace shows movement as programed in G-Code, but table movement is 180 degrees different.

Example, G-Code is for a square and starts cut at 12 o-clock position with clockwise travel.
TOOL PATH shows starting at 12 o-clock position with clockwise travel as programmed.
MACHINE starts at 6 o-clock position with clockwise travel.

What am I missing ???
Is there a MIRROR Parameter that is somehow turned ON ???

THANKS FOR HELP
Reply

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list