usb hub working is unstable - DDCSV3.1 Standalone CNC Motion Controller - Digital Dream Technology support
View: 2998|Reply: 2
Print Previous Topic Next Topic

usb hub working is unstable

[Copy Link]

1

Threads

28

Posts

131

Credits

Registered member

Rank: 2

Credits
131
Jump to the specified floor
Landlord
usb hub working is unstable

Добрый день.

Концентраторы usb функционирует нестабильно:
1) устройства то определяются, то нет;
2) если устройство подключилось, то до отключения оно будет работать. При этом в соседних портах хаба устройства могут не определятся;
3) работоспособность не зависит от длинны usb кабелей;
4) работоспособность аналогична при подключении hub - hub - hub - device;
5) работоспособность конкретных портов usb hub постоянно меняется.

---------------------------------------------------------------

Hello!

Usb hubs are unstable:
1) devices are sometimes detected, sometimes not;
2) if the device is connected, it will work until removed. At the same time, devices may not be detected in the neighboring ports of the hub;
3) functioning does not depend on the length of usb cables;
4) functioning does not depend hub-device OR hub-hub-hub-device is connected;
5) the functioning of specific ports of the usb hub is constantly changing.

usb hubs n devices.jpg (212.17 KB, Down times: 381)

usb hubs n devices.jpg
Reply

Use props Report

0

Threads

37

Posts

198

Credits

Administrator

Rank: 9Rank: 9Rank: 9

Credits
198
Bench
Posted at 2021-9-27 13:34:20 | Only Author
AndreyB Posted at 2021-9-23 19:49
I sense software bug. But dont sure.
I'm still on 2020-03-06-112NOR firmware.

"2020-03-06-112NOR firmware" is the latest edition.
Reply Support Opposition

Use props Report

1

Threads

28

Posts

131

Credits

Registered member

Rank: 2

Credits
131
Sofa
 Author| Posted at 2021-9-23 19:49:02 | Only Author
I sense software bug. But dont sure.
I'm still on 2020-03-06-112NOR firmware.
Reply Support Opposition

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list