Four digit inch (Imperial) resolution?

math_indy

When parameter #115 "Unit Selection" is set to 1 (Imperial) the display is in 0.000 inches.  


Is there any way get the DDCSV2.1 to show four digits when in inch mode (0.0000")?  


This seems like a reasonable request as the mm display has three digits and 0.001mm = 0.00004".

math_indy

ytliu Posted at 2018-9-20 07:22
Thanks, I will adopt your suggestion.

I see that the latest software version now has inches mode now displayed with four digits (0.0000")!

YTLIU you are the best

ytliu

Thanks, I will adopt your suggestion.