15 ton European-spec Single Girder Gantry Crane for sale to Australia

taitai

We have completed 1 single girder gantry crane installation project in Australia, which is a 15 ton European-spec Single Girder Gantry Crane, model MHO, from Qingdao, China to Sydney, Australia. The main beam of the gantry crane is a Welded box-section beam, mainly uses material Q235B carbon structural steel strong and elegant, easy to maintain, Three-layer painting, and the hoisting equipment adopts a low headroom hoist. The performance of the low headroom hoist is: Inverter traveling speed and lifting speed, Reducer, drum, motors, Insultation grade, F Protection class IP54.

European-spec Single Girder Gantry Crane Parameters

• Lifting capacity: 15T
• Lifting height: 7M
• Span: 20M
• Power supply: 415v 3phase 50hz
• Pendant control and remote control
• Working class: FEM2M (ISO M5)
  

Technical Specifications

Lifting capacity			t		15
Lifting height			m		7
Span					20
Speed	Cross traveling speed		m/min		2.0~20 (inverter control)
	Crane traveling speed				2.0~20 (inverter control)
	Lifting speed				0.7~4.0 (inverter control)
Working class			/		FEM2M (ISO M5)
Power supply			V/Hz/P		415V/50HZ/3P
Crane traveling power			KW		2.2*2
Trolley traveling power					1.1*2
Lifting power					13
Total power					19.6
Max. wheel load			KN		133.8
Total weight			t		17.7
Ambient temperature			/		-20℃ ~ +40℃
Anti-collision system		/		Included
Phase protection relays		/		Included
Limit switch		/		Included
Voltage Low Protect device		/		Included
Emergency stop action		/		Included
Ground fault protection		/		Included
Short-circuit protection		/		Included
Over-heating protection		/		Included
Power-off protection		/		Included
Over-current protection		/		Included
Overload protector		/		Included
Top Quality Buffer		/		Included
Country of Origin				China

Recommended Rail Specification

Type	Top Width(mm)	Bottom Width(mm)	Height(mm)	Weight(kg/m)
P38	68	114	134	38.73

European-spec Single Girder Gantry Crane Finished Installation

Lifting hoist & Electrics

(The above picture is for reference to crane model only)

In addition to the advantages of ordinary single-beam cranes, European-style single-girder cranes adopt low-headroom design in design concept, which can effectively increase the transportation space, and the unique C-shaped structure increases the hoisting space accordingly. In terms of appearance, it is European-style design, light in weight, and can be programmed to lift the limit to achieve comprehensive protection. In terms of performance, it has stable startup and operation, no impact, good mute effect, and reduced noise pollution; and low failure rate, which can reduce maintenance costs and prolong service life. In the system composition, there is a hard tooth surface reducer, which has high bearing capacity and long service life; semi-grease lubrication and high-strength galvanized anti-rust steel wire rope, maintenance-free; and a three-in-one drive of motor, brake and reduction box

15 ton European-spec Single Girder Gantry Crane for sale to Australia