Digital Dream Technology support

Title: DDCS V3.1 with 6 Proximity Sensors NPN [Print This Page]

Author: gasmas Time: 2021-11-26 05:00
Title: DDCS V3.1 with 6 Proximity Sensors NPN

Please help me. I have DDCS V3.1 and I have installed 6 npn switches with three cables on the 3 XYZ axles but they work properly in one direction and stop at the limits I have set, they do not work when they go to the beginning, the lights is on but the axles do not stop. Can you help me what to do? My machine is a Mill.
Thank You Very Much,
Fotini.

Author: gasmas Time: 2021-11-29 11:34
Last edited by gasmas In 2021-11-29 11:36 Editor

Ι find it myself

Author: gasmas Time: 2021-11-29 11:35
Ι find it myself

Author: bhollywood Time: 2022-3-16 08:06
what did you do? I'm having this problem

Author: AndreyB Time: 2022-3-18 01:12
Check home parameters:
#116
#117
#118
maybe
#51

Author: bhollywood Time: 2022-3-28 08:48
are you suppose to have the side opposite the home plugged into the limit+/-. right now I got 3 plugged into home xyz and 2 plugged into limit xy. where am I plugging these things, this is getting annoying, the setting have no meaning whatsoever

Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)