Title: Axis Issue in Automatic Mode Only [Print This Page] Author: FloorBoard Time: 2021-8-22 04:54 Title: Axis Issue in Automatic Mode Only Just getting new machine running with DDCSV3.1 with Ver: 2020-03-06-112NOR
Problem with axis movement in AUTOMATIC Mode only.
MPG Mode, all axis move in correct direction.
STEP Mode, all axis move in correct direction.
CONT Mode, all axis move in correct direction.
HOME Mode, all axis move in correct direction.
In AUTOMATIC Mode, X and Y axis are rotated 180 degrees.
TOOL PATH trace shows movement as programed in G-Code, but table movement is 180 degrees different.
Example, G-Code is for a square and starts cut at 12 o-clock position with clockwise travel.
TOOL PATH shows starting at 12 o-clock position with clockwise travel as programmed.
MACHINE starts at 6 o-clock position with clockwise travel.
What am I missing ???
Is there a MIRROR Parameter that is somehow turned ON ???
THANKS FOR HELP
Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)