Digital Dream Technology support

Title: Problem with M6 [Print This Page]

Author: Nikolay81 Time: 2018-9-21 20:22
Title: Problem with M6
After the last firmware, the M6 command stopped working.
The contents of the T.nc file are not executed.
What could be the problem? Delete and copy it again, I already tried.
The settings file is attached to the message.

setting.rar

4.91 KB, Down times: 637

Author: ytliu Time: 2018-9-21 21:17
I use the setting file you provided, I did not find the problem you said, I can call T.nc correctly.

Author: Nikolay81 Time: 2018-9-24 23:01

ytliu Posted at 2018-9-21 21:17
I use the setting file you provided, I did not find the problem you said, I can call T.nc correctly.

I reformatted the flash drive and the problem somehow went away. Then I returned all the files to it, but the problem did not happen again. Probably, the problem was with a flash drive. Thank you for trying.

Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)