Digital Dream Technology support

Title: Set home offset [Print This Page]

Author: neel8440924 Time: 2018-9-3 08:48
Title: Set home offset
there is no way to do a home offset. my mach has the X axis home at full pos (right side) forcing me to use right for zero vs left. is there any way to add a home offset. I guess in g54 it does not matter anyway but it would be nice

Author: ytliu Time: 2018-9-4 06:38
In the home process, when the Home signal is checked, the machine coordinates are set to home offset instead of 0. Is this what you expect?

Author: neel8440924 Time: 2018-9-4 14:20
Thanks for reply, yes this is exactly what i need.

Author: ytliu Time: 2018-9-4 21:48

neel8440924 Posted at 2018-9-4 14:20
Thanks for reply, yes this is exactly what i need.

Ok. We will add this feature to the new version.

Author: neel8440924 Time: 2018-9-6 00:24
ok thanks, happy to see new features added everyday keep up the good work

Author: Will_D Time: 2018-9-6 21:51
Regarding the original post:

Is this because of your hardware i.e only 1 limit switch on the X axis?

Author: neel8440924 Time: 2018-9-6 22:52

Will_D Posted at 2018-9-6 21:51
Regarding the original post:

Is this because of your hardware i.e only 1 limit switch on the X axis ...

yes, i use inductive proximity switch npn SN04 for homing sequence which is placed on right side, but i also have mechanical limit switches on both sides.

Author: ytliu Time: 2018-9-7 07:02

neel8440924 Posted at 2018-9-6 22:52
yes, i use inductive proximity switch npn SN04 for homing sequence which is placed on right side, ...

Ver:2018-09-07-100 Description:
1. Increase the home offset configuration.

install(2018-09-07-100).zip

589.38 KB, Down times: 652

Author: neel8440924 Time: 2018-9-7 15:49

ytliu Posted at 2018-9-7 07:02
Ver:2018-09-07-100 Description:
1. Increase the home offset configuration.

thanks for the update, it works correctly as expected

Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)