Digital Dream Technology support

Title: DDCSV4.1 issue to Run a Gcode [Print This Page]

Author: deserg Time: 2024-4-14 23:06
Title: DDCSV4.1 issue to Run a Gcode
Last edited by deserg In 2024-4-14 23:16 Editor

Hi to all !

I'm trying to run my first Gcode file and i receive the following message when i press the start button.

message: "Without Home operation, can't start."

Can anyone help me to understand what's the actual meaning of this message and how to fix it?

The machine can execute "Home to all axis" without problems.

I'm trying to run the following Gcode:

( Test )
( File created: Sunday April 14 2024 - 11:17 AM)
( for DDCSV2.1 )
( Material Size X= 265.000, Y= 490.000 ,Z= 20.000 )
( Home X = X0.000 Home Y = Y0.000 Home Z = Z20.000 )
()
(Toolpaths used in this file

(Pocket 1)
(Profile 1)
(Tools used in this file: )
(1 = End Mill (4 mm)-2 FL)
T1M6 (End Mill (4 mm)-2 FL)
G17
G0Z20.000H1
G0X0.000Y0.000S1000M3
(Pocket 1)
G0X60.000Y61.600Z5.000
G1Z-2.000F900.0
G3X58.400Y60.000I0.000J-1.600F2000.0
G3X60.000Y58.400I1.600J0.000
G3X61.600Y60.000I0.000J1.600
G3X60.000Y61.600I-1.600J0.000
G1Y63.200
G3X56.800Y60.000I0.000J-3.200
G3X60.000Y56.800I3.200J0.000
G3X63.200Y60.000I0.000J3.200
G3X60.000Y63.200I-3.200J0.000
G1Y64.800
G3X55.200Y60.000I0.000J-4.800
G3X60.000Y55.200I4.800J0.000
G3X64.800Y60.000I0.000J4.800
G3X60.000Y64.800I-4.800J0.000
G1Y66.400
G3X53.600Y60.000I0.000J-6.400
G3X60.000Y53.600I6.400J0.000
G3X66.400Y60.000I0.000J6.400
G3X60.000Y66.400I-6.400J0.000
G1Y68.000
G3X52.000Y60.000I0.000J-8.000
G3X60.000Y52.000I8.000J0.000
G3X68.000Y60.000I0.000J8.000
G3X60.000Y68.000I-8.000J0.000
G0Z5.000
(Profile 1)
()
G0X8.000Y10.000Z5.000
G1Z-1.667F900.0
G1Y110.000F2000.0
G2X10.000Y112.000I2.000J0.000
G1X110.000
G2X112.000Y110.000I0.000J-2.000
G1Y10.000
G2X110.000Y8.000I-2.000J0.000
G1X10.000
G2X8.000Y10.000I0.000J2.000
G1Z-3.333F900.0
G1Y110.000F2000.0
G2X10.000Y112.000I2.000J0.000
G1X110.000
G2X112.000Y110.000I0.000J-2.000
G1Y10.000
G2X110.000Y8.000I-2.000J0.000
G1X10.000
G2X8.000Y10.000I0.000J2.000
G1Z-5.000F900.0
G1Y110.000F2000.0
G2X10.000Y112.000I2.000J0.000
G1X110.000
G2X112.000Y110.000I0.000J-2.000
G1Y10.000
G2X110.000Y8.000I-2.000J0.000
G1X10.000
G2X8.000Y10.000I0.000J2.000
G0Z5.000
G0Z20.000
G0X0.000Y0.000
M30

Thank you in advance!

viber_image_2024-04-14_17-54-26-276.jpg (175.21 KB, Down times: 36)

message when i press Start

Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)