Title: Mpg wont work [Print This Page] Author: Will Time: 2020-3-15 06:16 Title: Mpg wont work I have a ddcsv 3.1 with mpg I bought as a set. Qhen I plug in the mpg nothing works . The motors estop nothing. The estop is enabled and all the seeting for mpg I ja e tried every combination. Any ideas. The green light is on so it has power. And I checks that all the wires have continuation.
ThanksAuthor: Will Time: 2020-3-15 09:47
Solved...I did not realize that the mpg need the xoma ports energized....Author: Cuervoal Time: 2020-3-30 22:37
Good morning. I have a same controller and have the same problem, you can shared whit me how you solved it, my email is alondono862@misena.edu.co
Best Regards.Author: gerhard Time: 2020-4-19 00:55 Last edited by gerhard In 2020-4-30 17:58 Editor
Hi Alll.
My MPG is working exept for the Y-Axis. Even the keypad is working 100% .Looks like a setting isue.
Also when I use the probe function, the probe will go up by 5mm instead of down. Looks like another wrong setting on my side.
Please can someone help.
Author: BradDBrad Time: 2020-4-20 17:38
Hello,
What are the XOMA ports?
-BAuthor: BradDBrad Time: 2020-5-5 04:30
I solved my problem, this had to do with adding a second power supply for the limits and home switches.Author: edison Time: 2020-8-11 07:01
tenho o mesmo problema aqui..vc rsolveu?
Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)