Digital Dream Technology support

Title: Cnc cutting objects oversize [Print This Page]

Author: Dusty Time: 2019-10-31 10:36
Title: Cnc cutting objects oversize
I’m cutting a piece of plywood to 5”x 5”,
The cnc cutter cut the piece over size by 3/8” or more.
I’m using closed loop motors for X & Y
My cnc is a neat 30 X 40 with ball screws
I am using vertical 2D and their post processor.
Nothing works help

Author: Will_D Time: 2019-10-31 18:14
Could you post the g-code please?

Author: Dusty Time: 2019-11-1 22:52
Last edited by Dusty In 2019-11-2 02:01 Editor

Will_D Posted at 2019-10-31 18:14
Could you post the g-code please

i sent a copy of the g code to jessy, at info@ddcnc.com

Profile 5x5.zip

851 Bytes, Down times: 585

per your request

Author: Dusty Time: 2019-11-3 11:31
My oversize cutting issue has been resolved. The problem was not in the DDSCV2.1 software . The problem originated in the drawing software setting mainly the offset in the toolpath settings

Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)