Title: Problems with Dir Signal on y-Axis on DDCNC v3.1 [Print This Page] Author: phil Time: 2023-5-14 21:47 Title: Problems with Dir Signal on y-Axis on DDCNC v3.1 Hey,
Unfortunately I have problems with my controller if I try to control the y_axis and change direction fast to one and the other the dir signal does not get put out ://
What can I do About it
Visualisation of Dir Signal from Ossiloscope
My case:
__--__--______--
Wanted movment:
__--__--__--__--
Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)